Domestic demand-side response with heat pumps: controls and tariffs

ABSTRACT

Electric heat pumps feature prominently in projected energy transitions in the UK and elsewhere. Owing to their high electricity consumption, heat pumps are viewed as important targets for demand-side response (DSR). Findings are presented from a field trial of a new control system that aims to optimize heat pump performance, including under time-varying tariff conditions. The trial involved monitoring 76 properties with heat pumps, but without dedicated heat storage; 31 of these received the control system. Interviews were conducted with a subsample of 12 participants. The controller successfully evened out electricity demand over the day (reducing the evening peak), but this was associated with increased late night and daytime temperatures. Interview participants reported some disturbance owing to overnight heating and noise, as well as usability issues with the controller interface and hardware. These issues present risks to the future acceptability of such systems. While the system delivered short-term demand reductions successfully, longer-term demand shifting risked causing unacceptable disturbance to occupants. Future control systems could overcome some of the issues identified in this pioneering trial through more effective zoning, using temperature caps or installing dedicated heat storage, but these may either limit the available flexibility or be challenging to achieve.     

Robust orientation control of multi‐DOF cell based on uncertainty and disturbance estimation

Multiple degrees‐of‐freedom (multi‐DOF) cell orientation control is a vital important technique involved in single cell surgery applications. Currently, few studies have been performed toward automation of multi‐DOF cell orientation control using robotically controlled optical tweezers. In this paper, a robust control framework is developed to perform multi‐DOF cell rotational control with consideration of model uncertainties and external disturbances. Both simulation and experimental studies are presented to illustrate the performance of the proposed control strategy. The main contributions of this work lie in that this is the first time to develop a unified framework to achieve multi‐DOF cell orientation control without the need for accurate dynamic model parameters and/or any knowledge about uncertainty characteristic, which greatly enhances the robustness of the overall system.     

基于UG的采煤机防爆盖板三维标注及数控工艺研究

随着三维CAD技术的发展,产品制造信息在三维模型和二维图纸之间的反复传递,严重影响了产品制造信息的正确、快速传递。基于三维产品制造信息技术,以采煤机防爆盖板为例,在UG NX10.0中建立了防爆盖板的三维模型并进行了三维标注,设计了加工工艺路线,规划了数控加工刀具轨迹,进行了加工仿真,验证了数控加工的正确性,在此基础上完成了采煤机防爆盖板的三维工艺式设计。该研究对基于模型定义的数字化设计与制造研究,实现制造业信息化具有重要意义。     

基于ATP-ABE的访问控制方案

对访问控制机制中存在的安全性和有效性的问题进行了研究，提出了基于访问树剪枝的属性加密ATP-ABE（Access Tree Pruning Attribute Based Encryption）的访问控制方案。当ATP-ABE算法需要访问它的树型结构访问策略时，通过剪枝处理访问树结构中包含用户ID属性节点的分支，提高了用户所有者DO（Data Owner）管理和控制属性的效率，更加有效地实现了数据共享。还为访问树结构设计了许可访问属性，使DO仍保留共享数据的关键属性，并且能够完全控制它们的共享数据。基于决策双线性密钥交换算法DBDH（Decisional Bilinear Diffie-Hellman）假设分析了ATP-ABE方案的安全性，研究结果表明与两种经典ABE方案比较，ATP-ABE更加有效地减少了算法的系统设置、私钥生成、密文大小、用户属性撤销以及加解密过程中的计算开销，并给出了定量结论。     

Adaptive neural network command filtered backstepping control of pure‐feedback systems in presence of full state constraints

An adaptive neural network (NN) command filtered backstepping control is proposed for the pure‐feedback system subjected to time‐varying output/stated constraints. By introducing a one‐to‐one nonlinear mapping, the obstacle caused by full stated constraints is conquered. The adaptive control law is constructed by command filtered backstepping technology and radial basis function NNs, where only one learning parameter needs to be updated online. The stability analysis via nonlinear small‐gain theorem shows that all the signals in closed‐loop system are semiglobal uniformly ultimately bounded. The simulation examples demonstrate the effectiveness of the proposed control scheme.     

Motion control of underactuated linkage robot based on gymnastic skill

In this paper, a reproduction of a swing‐up and a giant swing motion of underactuated robots based on technique of the horizontal bar gymnast is discussed with focusing on an equivalent center of mass (ECM) of underactuated robots and the gymnast. At first, the behaviors of the ECM of the gymnast (ECMG) are analyzed by using a motion capturing technique and an efficient motion of the ECMG for the swing‐up and for the giant swing motion are identified from analysis results, respectively. Next, a partial linearization method, which can realize that the ECM of the Acrobot (ECMA) replicates this efficient motion, is designed and reproduces the underactuated robots the swing‐up and giant swing motion like the gymnast. Finally, an effectiveness of the proposed controller is shown by numerical simulations.     

硫磷混合酸溶样重铬酸钾容量法测定全铁

介绍了硫磷混合酸溶样重铬酸钾容量法测定矿石中铁含量的方法和步骤。重点讨论了一线生产中的质量控制。     

爆炸防控技术在爆破工程警务规划和技术评估中应用

通过介绍爆炸防控技术概念的内涵和外延,说明了爆破工程警务规划设计和技术评估的目的,就是有效防止或遏制涉爆事故,维护社会公共安全。在对一项复杂环境下的基础开挖爆破工程实施警务规划设计和技术评估时,警务技术民警对照爆破作业设计施工单位技术方案中的参数,现场核实需要保护的建筑和重要设施,准确测量保护目标与爆区的实际距离,分析是否存在影响爆破工程实施的不稳定因素,确认上述参数符合安全要求后做出准予爆破许可的建议。爆破工程警务规划设计和技术评估的要点就是要通过现场核查,核实爆破有害效应是否可控,能否确保爆破施工时周边保护目标的安全。     

Observer-based prescribed performance attitude control for flexible spacecraft with actuator saturation

This paper investigates the prescribed performance attitude control problem for flexible spacecraft subject to external disturbances and actuator constraints. By using a new performance function and an error transformation, the attitude control system is transformed into an error system which will be kept bounded to ensure expected dynamic and steady-state responses. Compared with the commonly used performance function, the modified one has an explicit prespecified terminal time which determines the maximum convergence time of the attitude control system. A modal observer and a disturbance observer are designed to deal with the flexible vibration and disturbances, respectively. Furthermore, when considering actuator saturation, an improved control strategy is developed with an auxiliary system utilized to compensate the saturation. The stability of the closed-loop system is analyzed by Lyapunov theory. Simulation results show the effectiveness and performance of the proposed methods.     

Dhh1 is a member of the SESA network

The correct separation of chromosomes during mitosis is necessary to prevent genetic instability and aneuploidy, which are responsible for cancer and other diseases, and it depends on proper centrosome duplication. In a recent study, we found that Smy2 can suppress the essential role of Mps2 in the insertion of yeast centrosome into the nuclear membrane by interacting with Eap1, Scp160, and Asc1 and designated this network as SESA (S my2, E ap1, S cp160, A sc1). Detailed analysis showed that the SESA network is part of a mechanism which regulates translation of POM34 mRNA. Thus, SESA is a system that suppresses spindle pole body duplication defects by repressing the translation of POM34 mRNA. In this study, we performed a genome-wide screening in order to identify new members of the SESA network and confirmed Dhh1 as a putative member. Dhh1 is a cytoplasmic DEAD-box helicase known to regulate translation. Therefore, we hypothesized that Dhh1 is responsible for the highly selective inhibition of POM34 mRNA by SESA.